1: Coggs for the gears

     Place the blue cogs, or blue small gears next to where the axel is located

2: The Gears

      Place the Grey gear on the right hand side of the case and to the left of the blue gear you place the white gear on the black pin left of the blue gear

3: Cover for the Gears

      Place the light blue plastic cover and place it on top of the white and blue gears

4: Place the Viewfinder

        Place the view finder in the upper center of the front camera body

5: Film and Film wheel

      Place the circular lens on the axel located in the direct center of the camera

6:Mother/circut Board

                   Place the circuit board next to where the lens is located

7:The front Cover

        Place the flash cover of the case above the motherboard and apply pressure until it remains in place on its own

8: Film and Film Wheel

            Place the cylindrical wheel on the left 

      spherical opening and the film on the right spherical opening

9: Battery

       Place the battery in the far left narrow cylindrical opening where it belongs

10: Latches and seals

      Place the back of the case on the camera setting until it is able to remain in place on its own

Push the latches down as far as you can and the camera will remain in place.